Water Pump Assembly – Mitsubishi Part Number 1300A066

You can buy this OEM Mitsubishi Water Pump By Clicking Here

This OEM Mitsubishi Water Pump Assembly, part number 1300A066, is made for the following 2004-2012 Mitsubishi Vehicles. Always use OEM Mitsubishi Parts when working on your vehicle. Aftermarket parts may degrade vehicle performance, reliability and longevity.

THIS WATER PUMP FITS THE FOLLOWING VEHICLES:

Year and Model	Body and Trim
2012 Mitsubishi Eclipse	GS, GS Sport, SE, Spyder GS Sport, Spyder SE
2011 Mitsubishi Eclipse	GS, GS Sport, Spyder GS
2010 Mitsubishi Eclipse	GS, GS Sport, Spyder GS
2009 Mitsubishi Eclipse	GS, Spyder GS
2008 Mitsubishi Eclipse	GS, SE, Spyder GS
2007 Mitsubishi Eclipse	GS, Spyder GS
2006 Mitsubishi Eclipse	GS
2012 Mitsubishi Galant	ES, FE, SE
2011 Mitsubishi Galant	ES, FE, SE
2010 Mitsubishi Galant	ES, SE
2009 Mitsubishi Galant	ES, Sport Edition
2008 Mitsubishi Galant	DE, ES
2007 Mitsubishi Galant	DE, ES, SE
2006 Mitsubishi Galant	DE, ES, SE
2005 Mitsubishi Galant	DE, ES, SE
2004 Mitsubishi Galant	DE, ES
2006 Mitsubishi Lancer	Ralliart
2005 Mitsubishi Lancer	Ralliart
2004 Mitsubishi Lancer	Ralliart, Sportback, Sportback Ralliart
2006 Mitsubishi Outlander	LS, Limited, SE
2005 Mitsubishi Outlander	LS, Limited, XLS
2004 Mitsubishi Outlander	LS, XLS

You can buy this OEM Mitsubishi Water Pump By Clicking Here

• 

• 

• 

• 

• 

• 

• 

You can buy this OEM Mitsubishi Water Pump By Clicking Here

BEFORE REPLACING YOUR WATER PUMP, KNOW THIS:

Sometimes people believe they need to replace their water pumps during periodic vehicle maintenance because some coolant leakage is found in the vicinity of the steam vent hole or the water drain hole. However, this replacement is usually unnecessary because it is normal that steam or mist passes through the mechanical seal, which is used to seal the rotating shaft portion of the water pump.

The steam or mist that passes through the mechanical seal escapes from the steam vent hole or the water drain hole and does not affect the seal performance.

If coolant leakage is discovered near the steam vent hole or the water drain hole, refer to the following flow chart to determine if replacement of the water pump is necessary or not: 

* Checking Method:
1. If water drain hole is visible:
Confirm there is a leakage mark under the drain hole. 

2. If water drain hole is not visible:
Confirm there is a leakage mark on underside of water pump (whether water pump is visible or not).

Water Catcher

On some engines, a water catcher is provided to prevent water leakage from the drain hole (as shown below). In this case, it could be considered abnormal if a wet water leakage mark is identified around the drain hole.

Normal Condition

The photos below show an example of a normal condition of coolant leakage residue:

You can buy this OEM Mitsubishi Water Pump By Clicking Here

The OEM Mitsubishi Water Pump Assembly, part number 1300A066, is made for 2004-2012 Mitsubishi Vehicles. Always use OEM Mitsubishi Parts when working on your vehicle. Aftermarket parts may degrade vehicle performance, reliability and longevity.